TRIO-PS/1AC/5DC/10 2902646 PHOENIX CONTACT Power supply unit

TRIO-PS/1AC/5DC/10 2902646 PHOENIX CONTACT Power supply unit

TRIO-PS/1AC/5DC/10 2902646 PHOENIX CONTACT Power supply unit

Power supply unit

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

SKU: 2902646 Danh mục: Power Supplies (PS) Thẻ: 2902646, PHOENIX_CONTACT, TRIO-PS/1AC/5DC/10

Mô tả

Key Commercial Data

Orderkey	2902646
Packing unit	1 pc
GTIN	4046356669672
Weight per Piece (excluding packing)	600.000 g
Custom tariff number	85044030
Country of origin	CN (China)

Dimensions

Width	40 mm
Height	130 mm
Depth	115 mm

Ambient conditions

Degree of protection	IP20
Ambient temperature (operation)	-25 °C … 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)	-40 °C … 85 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Climatic class	3K3 (in acc. with EN 60721)
Degree of pollution	2

Input data

Nominal input voltage range	100 V AC … 240 V AC
Input voltage range	85 V AC … 264 V AC (Derating < 90 V AC: 2.5 %/K)
Dielectric strength maximum	300 V AC
AC frequency range	45 Hz … 65 Hz
Discharge current to PE	< 3.5 mA
Current consumption	1 A (120 V AC)
	0.5 A (230 V AC)
Nominal power consumption	131.4 VA
Inrush surge current	< 30 A
Mains buffering	> 40 ms (120 V AC)
	> 180 ms (230 V AC)
Choice of suitable circuit breakers	6 A … 16 A (Characteristics B, C, D, K)
Power factor (cos phi)	0.48
Type of protection	Transient surge protection
Protective circuit/component	Varistor

Output data

Nominal output voltage	5 V DC ±1 %
Setting range of the output voltage (U_Set)	4.5 V DC … 6 V DC (> 12 V DC, constant capacity restricted)
Nominal output current (I_N)	10 A (-25 °C … 55 °C)
Derating	55 °C … 70 °C (2.5%/K)
Connection in parallel	Yes, for redundancy and increased capacity
Connection in series	yes
Feedback resistance	approx. 9 V DC
Protection against surge voltage on the output	< 9 V DC
Max. capacitive load	unlimited
Active current limitation	Approx. 12 A (in the event of a short-circuit)
Control deviation	< 1 % (change in load, static 10 % … 90 %)
	< 2 % (change in load, dynamic 10 % … 90 %)
	< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 60 mV_PP
Output power	50 W
Typical response time	< 1 s
Peak switching voltages nominal load	< 70 mV_PP
Maximum power dissipation in no-load condition	1.5 W
Power loss nominal load max.	13.5 W

General

Net weight	0.6 kg
Efficiency	> 80 % (230 V AC)
Insulation voltage input/output	4 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage input / PE	2 kV AC (type test)
	2 kV AC (routine test)
Insulation voltage output / PE	500 V DC (routine test)
Protection class	I
Degree of protection	IP20
MTBF (IEC 61709, SN 29500)	> 500000 h
Mounting position	horizontal DIN rail NS 35, EN 60715
Assembly instructions	alignable: horizontally 0 mm, vertically 50 mm

(+84) 908 556 822

(+84) 938 388 289