Flush-type socket, 4-position, Socket, angled, D-coded, PCB mounting, Solder pins
Key Commercial Data
Orderkey | 1028581 |
---|---|
Packing unit | 1 |
GTIN | 4055626666082 |
Custom tariff number | 85366990 |
Ambient conditions
Ambient temperature (operation) | -25 °C … 105 °C (Plug / socket) |
---|---|
-40 °C … 105 °C (without mechanical actuation) | |
Degree of protection | IP67 |
General
Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
---|---|
Not compatible with SPEEDCON housings. | |
Rated current at 40°C | 4 A |
Rated voltage | 250 V |
Rated surge voltage | 2.5 kV |
Number of positions | 4 |
Insulation resistance | ≥ 100 MΩ |
Coding | D-coded |
Standards/regulations | M12 connector IEC 61076-2-101 |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Connection method | Solder pins |
Insertion/withdrawal cycles | > 100 |
Torque | 3 Nm … 4 Nm (Installation-side) |
Mounting type | PCB mounting The pin assignment is rotated 180° to comply with the standard. |
Material
Flammability rating according to UL 94 | V0 |
---|---|
Contact material | CuZn |
Contact surface material | Au |
Contact carrier material | PA 6.6 |
Cable
Standards/specifications | M12 connector IEC 61076-2-101 |
---|---|
Ambient temperature (operation) | -40 °C … 105 °C (cable, fixed installation) |
-25 °C … 105 °C (cable, flexible installation) |
Standards and Regulations
Standard designation | M12 connector |
---|---|
Standards/regulations | IEC 61076-2-101 |
Flammability rating according to UL 94 | V0 |