Key Commercial Data
Orderkey | 2987338 |
---|---|
Packing unit | 1 pc |
GTIN | 4046356491112 |
Weight per Piece (excluding packing) | 0.000 g |
Custom tariff number | 85364190 |
Country of origin | AT (Austria) |
Ambient conditions
Ambient temperature (operation) | -40 °C … 85 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Maximum altitude | ≤ 2000 m |
Degree of protection | RT II |
Coil side
Nominal input voltage UN | 24 V DC |
---|---|
Input voltage range in reference to UN | see diagram |
Typical input current at UN | 17 mA |
Typical response time | 8 ms |
Typical release time | 3 ms |
Coil resistance | 1440 Ω ±10 % (20 °C) |
Power dissipation for nominal condition | 0.41 W |
Contact side
Contact type | 1 N/O contact |
---|---|
Type of switch contact | Single contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 12 V (100 mA) |
Min. switching current | 100 mA (at 12 V DC) |
Maximum inrush current | 165 A (20 ms) |
800 A (200 µs) | |
Limiting continuous current | 16 A |
Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
58 W (at 48 V DC) | |
48 W (at 60 V DC) | |
50 W (at 110 V DC) | |
80 W (at 220 V DC) | |
4000 VA (for 250 V AC) | |
Switching capacity min. | 1200 mW |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.2 A (at 250 V, DC13) | |
6 A (at 24 V, AC15) | |
6 A (at 120 V, AC15) | |
6 A (at 250 V, AC15) |
General
Test voltage relay winding/relay contact | 5 kV AC (50 Hz, 1 min.) |
---|---|
Operating mode | 100% operating factor |
Mechanical service life | 3x 107cycles |
Mounting position | any |
Assembly instructions | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
Standards and Regulations
Standards/regulations | EN 50178 |
---|---|
EN 61810-1 | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 6 kV |
Insulation | Safe isolation, reinforced insulation |
Pollution degree | 3 |
Overvoltage category | III |
Environmental Product Compliance
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer’s declaration” |
Classifications
[email protected]
[email protected] 4.0 | 27371104 |
---|---|
[email protected] 4.1 | 27371104 |
[email protected] 5.0 | 27371001 |
[email protected] 5.1 | 27371001 |
[email protected] 6.0 | 27371001 |
[email protected] 7.0 | 27371001 |
[email protected] 8.0 | 27371601 |
[email protected] 9.0 | 27371601 |
ETIM
ETIM 2.0 | EC000196 |
---|---|
ETIM 3.0 | EC000196 |
ETIM 4.0 | EC000196 |
ETIM 5.0 | EC001437 |
ETIM 6.0 | EC001437 |
ETIM 7.0 | EC001437 |