Key Commercial Data
Orderkey | 2903685 |
---|---|
Packing unit | 10 pc |
Minimum order quantity | 10 pc |
Catalog page | Page 314 (C-5-2017) |
GTIN | 4046356758987 |
Weight per Piece (excluding packing) | 32.420 g |
Custom tariff number | 85364900 |
Country of origin | PL (Poland) |
Ambient conditions
Ambient temperature (operation) | -40 °C … 55 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Coil side
Nominal input voltage UN | 230 V AC |
---|---|
Input voltage range in reference to UN | see diagram |
Mains frequency | 50/60 Hz |
Typical input current at UN | 6.5 mA |
Typical response time | 5 ms … 15 ms (depending on phase relation) |
Typical release time range | 5 ms … 20 ms (depending on phase relation) |
Status display | Yellow LED |
Power dissipation for nominal condition | 1.5 W |
Contact side
Contact type | 4 PDTs |
---|---|
Type of switch contact | Single contact |
Contact material | AgNi, hard gold-plated |
Note | If the specified maximum values for multi-layer contact relays are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact. |
Maximum switching voltage | 30 V AC |
36 V DC | |
Minimum switching voltage | 2 V (At 24 mA) |
Min. switching current | 2 mA (24 V DC) |
Maximum inrush current | 50 mA |
Limiting continuous current | 50 mA |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Switching capacity min. | 48 mW |
Contact side (with destroyed gold layer)
Contact material | AgNi |
---|---|
Note | the following values are applicable if a gold layer is destroyed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (At 24 mA) |
Limiting continuous current | 6 A |
Maximum inrush current | 16 A (20 ms, N/O contact) |
Min. switching current | 5 mA (at 24 V) |
Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
124 W (at 48 V DC) | |
108 W (at 60 V DC) | |
52 W (at 110 V DC) | |
48 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.22 A (at 120 V, DC13) | |
0.11 A (at 250 V, DC13) | |
1.5 A (at 24 V, AC15) | |
1.5 A (at 120 V, AC15) | |
1 A (at 240 V, AC15) |