-
Features
Functional principle Photoelectric proximity sensor Functional principle detail Background suppression Sensing range max. 4 mm … 180 mm 1) Sensing range 10 mm … 180 mm 1) Emitted beam Light source PinPoint LED 2) Type of light Visible red light Light spot size (distance) Ø 6.5 mm (150 mm) Key LED figures Wave length 650 nm Adjustment IO-Link
Single teach-in button
Pin 2 configuration External input, Teach-in input, Sender off input, Detection output, logic output - 1) Object with 90% remission (based on standard white, DIN 5033).
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Safety-related parameters
MTTFD 868 years DCavg 0 %
-
Communication interface
IO-Link ✔ , COM2 (38,4 kBaud) Data transmission rate COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL object Bit 1 = switching signal QL gap Bit 2 … 15 = measuring value VendorID 26 DeviceID HEX 0x8001DB DeviceID DEC 8389083
-
Electrical data
Supply voltage UB 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 30 mA 3) Protection class III Digital output Type PNP Output current Imax. ≤ 100 mA Repeatability (response time) 150 µs 4) Switching frequency 1,000 Hz Switching mode Light/dark switching Circuit protection A 5)
B 6)
C 7)
D 8)
Response time Q/ on Pin 2 300 µs … 450 µs 4) 9) Switching frequency Q / to pin 2 1,000 Hz 10) - 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Valid for Q on Pin2, if configured with software.
- 5) A = VS connections reverse-polarity protected.
- 6) B = inputs and output reverse-polarity protected.
- 7) C = interference suppression.
- 8) D = outputs overcurrent and short-circuit protected.
- 9) Signal transit time with resistive load.
- 10) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
-
Mechanical data
Housing Rectangular Design detail Slim Dimensions (W x H x D) 12.2 mm x 41.8 mm x 17.3 mm Connection Male connector M8, 4-pin Material Housing Plastic, ABS Front screen Plastic, PMMA Weight 20 g
-
Ambient data
Enclosure rating IP67
IP66
Ambient operating temperature –40 °C … +60 °C Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 & NRKH7.E181493
-
Smart Task
Smart Task name Object and gap monitoring Logic function WINDOW Timer function Impulse width, impulse shift Response time 1)
2)
Repeatability 1)
2)
Time measurement accuracy SIO Direct: —
SIO Logic: – 0,7 … + 0,7 ms ± 0,5 % of time measurement value
IOL: – 0.9 … + 0.9 ms ± 0.5% of the time measurement
Time measurement accuracy (e.g. accuracy for time measurement value = 1 s ) SIO Direct: —
SIO Logic: – 5,7 … + 5,7 ms
IOL: – 5,9 … + 5,9 ms
Resolution time measuring value 1 ms Min. Time between two process events (switches) SIO Direct: —
SIO Logic: 500 µs
IOL: 800 µs
Switching signal Switching signal QL object Output type (dependant on the adjusted thresholds) Switching signal QL gap Output type (dependant on the adjusted thresholds) Measuring value Time measurement value - 1) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 2) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
-
Diagnosis
Device status Yes
-
Classifications
eCl@ss 5.0 27270904 eCl@ss 5.1.4 27270904 eCl@ss 6.0 27270904 eCl@ss 6.2 27270904 eCl@ss 7.0 27270904 eCl@ss 8.0 27270904 eCl@ss 8.1 27270904 eCl@ss 9.0 27270904 eCl@ss 10.0 27270904 eCl@ss 11.0 27270904 eCl@ss 12.0 27270903 ETIM 5.0 EC002719 ETIM 6.0 EC002719 ETIM 7.0 EC002719 ETIM 8.0 EC002719 UNSPSC 16.0901 39121528