-
Features
System part 1 Twin-Stick Resolution 14 mm Protective field height 300 mm Scanning range 4.5 m Response time 14 ms Items supplied 1 twin stick with pre-mounted connecting cable, 10 m
Test rod with diameter corresponding to the resolution of the safety light curtain
Safety instruction
Mounting instructions
Operating instructions for download
-
Safety-related parameters
Type Type 4 (IEC 61496-1) Safety integrity level SIL3 (IEC 61508) Category Category 4 (ISO 13849-1) Performance level PL e (ISO 13849-1) PFHD (mean probability of a dangerous failure per hour) 4.3 x 10–9 TM (mission time) 20 years (ISO 13849-1) Safe state in the event of a fault At least one OSSD is in the OFF state.
-
Functions
Functions Delivery status Protective operation ✔ Restart interlock ✔ Deactivated External device monitoring (EDM) ✔ Deactivated Beam coding ✔ Code 1
-
Interfaces
System connection Connection type Connecting cable (10 m) with flying leads, 5-wire Permitted cable length ≤ 20 m 1) Permitted cross-section ≥ 0.34 mm² Display elements LEDs - 1) The 10 m connecting cable attached to the twin stick can either be shortened as required or extended to a maximum of 20 m. the permissible wire cross-section must be observed.
-
Electrical data
Protection class III (IEC 61140) Supply voltage VS 24 V DC (19.2 V … 28.8 V) Residual ripple ≤ 10 % 1) Power consumption Approx. 161 mA Power consumption typical 3.1 W (DC) Output signal switching devices (OSSDs) Type of output PNP semiconductors, short-circuit protected, cross-circuit monitored 2) ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC … VS) OFF state, switching voltage LOW ≤ 2 V DC Current-carrying capacity per OSSD ≤ 300 mA - 1) Within the limits of VS.
- 2) Applies to the voltage range between –30 V and +30 V.
-
Mechanical data
Housing cross-section 40.5 mm x 20 mm Housing material Stainless steel V4A (1.4404, 316L) Average roughness Ra ≤ 0.8 µm Front screen material Chemically prestressed float glass Material of the end caps Stainless steel V4A (1.4404, 316L) Seal material EPDM PCB material Glass fiber reinforced epoxy resin with flame retardant TBBPA External material of the connecting cable TPU (PUR)
-
Ambient data
Enclosure rating IP65 (IEC 60529)
IP67 (IEC 60529)
Ambient operating temperature –20 °C … +55 °C Storage temperature –25 °C … +70 °C Air humidity 15 % … 95 %, Non-condensing Vibration resistance 5 g, 10 Hz … 55 Hz (IEC 60068-2-6) Shock resistance 10 g, 16 ms (EN 60068-2-27)
-
Other information
Wave length 850 nm Type of light Near-infrared (NIR), invisible
-
Classifications
eCl@ss 5.0 27272704 eCl@ss 5.1.4 27272704 eCl@ss 6.0 27272704 eCl@ss 6.2 27272704 eCl@ss 7.0 27272704 eCl@ss 8.0 27272704 eCl@ss 8.1 27272704 eCl@ss 9.0 27272704 eCl@ss 10.0 27272704 eCl@ss 11.0 27272704 eCl@ss 12.0 27272704 ETIM 5.0 EC002549 ETIM 6.0 EC002549 ETIM 7.0 EC002549 ETIM 8.0 EC002549 UNSPSC 16.0901 46171620