-
Features
Functional principle Through-beam photoelectric sensor Sensing range max. 0 m … 20 m Sensing range 0 m … 15 m Emitted beam Light source PinPoint LED 1) Type of light Visible red light Light spot size (distance) Ø 220 mm (15 m) Key LED figures Wave length 640 nm Adjustment IO-Link Angle of dispersion Approx. 1.5° Required accessories Auxiliary sensor (e.g. WSE12-3P2431, 1041459), Smart-Sensor Y-junction SYL-1204-G0M11-X1 (6055011), 2 x connecting cable (e.g. YF8U14-C60VA3M8U14, 2096612), optional: 2 x slotted diaphragm card BL-12-SKN (4031815), recommended for compliance with relative measurement error. - 1) Average service life: 100,000 h at TU = +25 °C.
-
Safety-related parameters
MTTFD 539 years DCavg 0 % TM (mission time) 20 years
-
Communication interface
Communication interface IO-Link V1.1 Communication Interface detail COM2 (38,4 kBaud) Cycle time 2.3 ms Process data length 16 Bit Process data structure Bit 0 = switching signal QL1
Bit 1 = Detection signal Qint.1
Bit 2 … 15 = measuring value
VendorID 26 DeviceID HEX 0x800223 DeviceID DEC 8389155
-
Electrical data
Supply voltage UB 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption, sender ≤ 30 mA 3) Current consumption, receiver ≤ 15 mA 3) Protection class III Digital output Type PNP Signal voltage PNP HIGH/LOW > Uv – 2,5 V / ca. 0 V Output current Imax. ≤ 100 mA Repeatability (response time) 100 µs 4) Switching frequency 1,500 Hz Switching mode Light/dark switching Circuit protection A 5)
B 6)
C 7)
D 8)
Response time Q/ on Pin 2 200 µs … 300 µs 4) 9) Switching frequency Q / to pin 2 ≤ 1,500 Hz 10) Test input sender off TE to 0 V - 1) Limit values when operated in short-circuit protected network: max. 8 A.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Valid for Q on Pin2, if configured with software.
- 5) A = VS connections reverse-polarity protected.
- 6) B = inputs and output reverse-polarity protected.
- 7) C = interference suppression.
- 8) D = outputs overcurrent and short-circuit protected.
- 9) Signal transit time with resistive load.
- 10) With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.
-
Mechanical data
Housing Rectangular Dimensions (W x H x D) 15.6 mm x 48.5 mm x 42 mm Connection Male connector M12, 4-pin Material Housing Metal, zinc diecast Front screen Plastic, PMMA Weight 120 g
-
Ambient data
Enclosure rating IP66
IP67
IP69K
Ambient operating temperature –40 °C … +60 °C Ambient temperature, storage –40 °C … +75 °C UL File No. NRKH.E181493 & NRKH7.E181493
-
Smart Task
Smart Task name Speed and Length Monitoring Measurement mode Speed
Length
Length incremental
Logic function WINDOW Timer function Impulse width, impulse shift Switching signal Switching signal QL1 Switching output to measuring value switching thresholds Measuring value Speed measurement value / length measurement value
-
Diagnosis
Device status Yes Function reserve Yes
-
Classifications
eCl@ss 5.0 27270901 eCl@ss 5.1.4 27270901 eCl@ss 6.0 27270901 eCl@ss 6.2 27270901 eCl@ss 7.0 27270901 eCl@ss 8.0 27270901 eCl@ss 8.1 27270901 eCl@ss 9.0 27270901 eCl@ss 10.0 27270901 eCl@ss 11.0 27270901 eCl@ss 12.0 27270901 ETIM 5.0 EC002716 ETIM 6.0 EC002716 ETIM 7.0 EC002716 ETIM 8.0 EC002716 UNSPSC 16.0901 39121528







