RAY10-AT4CBL

MultiTask photoelectric sensors
RAY10 Reflex Array

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

SKU: RAY10-AT4CBL Danh mục: Photoelectric sensors Thẻ: 1102079, RAY10-AT4CBL

Features

Functional principle	Photoelectric retro-reflective sensor
Functional principle detail	Dual lens, Reflex Array
Dimensions (W x H x D)	21.5 mm x 36 mm x 37.7 mm
Housing design (light emission)	Rectangular
Minimum object size	5 mm, position-independent detection within the light array
Detection height	25 mm
Sensing range max.	0 m … 1.5 m ¹⁾
Distance of the sensor to reflector	0.3 m … 1.5 m ¹⁾
Type of light	Visible red light
Light source	PinPoint LED ²⁾
Light spot size (distance)	37 mm x 12 mm (1 m)
Wave length	635 nm
Adjustment	Potentiometer
Special applications	Detecting transparent objects, Detecting perforated objects, Detecting uneven, shiny objects, Detecting objects with position tolerances, Detecting flat objects

Mechanics/electronics

Supply voltage	10 V DC … 30 V DC ¹⁾
Ripple	< 5 V_pp
Current consumption	30 mA ²⁾
Switching output	Push-pull: PNP/NPN
Output function	Alarm/Health output (Pin 2)
Switching mode	Light switching
Signal voltage PNP HIGH/LOW	Approx. V_S – 2.5 V / 0 V
Signal voltage NPN HIGH/LOW	Approx. VS / < 2.5 V
Output current I_max.	≤ 100 mA
Response time	≤ 0.5 ms ³⁾
Switching frequency	1,000 Hz ⁴⁾
Connection type	Cable with M12 male connector, 4-pin, 300 mm ⁵⁾
Cable material	PVC
Conductor cross section	0.13 mm²
Cable diameter	Ø 3.6 mm
Circuit protection	A ⁶⁾ B ⁷⁾ C ⁸⁾ D ⁹⁾
Protection class	III
Weight	130 g
Housing material	Plastic, ABS
Optics material	Plastic, PMMA
Enclosure rating	IP67
Ambient operating temperature	–40 °C … +60 °C ¹⁰⁾
Ambient temperature, storage	–40 °C … +70 °C
UL File No.	NRKH.E189383 & NRKH7.E189383

¹⁾ Limit values.
²⁾ Without load.
³⁾ Signal transit time with resistive load in switching mode. Different values possible in COM2 mode.
⁴⁾ With light/dark ratio 1:1 in switching mode. Different values possible in IO-Link mode.
⁵⁾ Do not bend below 0 °C.
⁶⁾ A = V_S connections reverse-polarity protected.
⁷⁾ B = inputs and output reverse-polarity protected.
⁸⁾ C = interference suppression.
⁹⁾ D = outputs overcurrent and short-circuit protected.
¹⁰⁾ Avoid condensation on the front screen of the sensor and on the reflector.

Classifications