Miniature photoelectric sensorsW4

Type:WL4SLGC-3P3052B01

Part no.:
1119068

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

Liên hệ:

Mô tả

Show all

Hide all

Features

Functional principle

Photoelectric retro-reflective sensor

Functional principle detail

Autocollimation

Sensing range max.

0 m … 3.5 m ¹⁾

²⁾

Sensing range

0 m … 2.2 m ¹⁾

²⁾

Polarisation filters

Yes

Emitted beam
Light source	Laser ³⁾
Type of light	Visible red light
Light spot size (distance)	Ø 0.4 mm (60 mm)

Key laser figures
Normative reference	EN 60825-1:2014, IEC 60825-1:2014 / CDRH 21 CFR 1040.10 & 1040.11
Laser class	1
Wave length	650 nm

Adjustment

IO-Link

Single teach-in button

Special applications

Detecting transparent objects, Detecting small objects

Mounting hole

Pin 2 configuration

External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output

AutoAdapt

✔

¹⁾ Reflective tape REF-AC1000.
²⁾ To ensure reliable operation, we recommend using REF-AC1000 reflective tape or reflective-tap reflectors such as P41F, PLV14-A, PLH25-M12, or PLH25-D12. Reflectors with large-scale triple structures must only be used if deemed suitable for the application.
³⁾ Average service life: 50,000 h at T_U = +25 °C.

Safety-related parameters
MTTF_D 655 years (EN ISO 13849-1) ¹⁾
- ¹⁾ Mode of calculation: Parts-Count-calculation.

Communication interface

IO-Link	✔ , COM2 (38,4 kBaud)
Data transmission rate	COM2 (38,4 kBaud)
Cycle time	2.3 ms
Process data length	16 Bit
Process data structure	Bit 0 = switching signal Q_L1
	Bit 1 = switching signal Q_L2
	Bit 2 … 15 = empty
VendorID	26
DeviceID HEX	0x800115
DeviceID DEC	8388885

Electrical data

Supply voltage U_B

10 V DC … 30 V DC ¹⁾

Ripple

< 5 V_pp ²⁾

Current consumption

30 mA ³⁾

Protection class

III

Digital output
Type	PNP ⁴⁾
Output current I_max.	≤ 100 mA
Response time	≤ 0.5 ms ⁵⁾
Repeatability (response time)	150 µs ⁶⁾
Switching frequency	1,000 Hz ⁷⁾

Switching mode

Light/dark switching ⁴⁾

Output function

Complementary

Circuit protection

A ⁸⁾

B ⁹⁾

C ¹⁰⁾

Response time Q/ on Pin 2

300 µs … 450 µs ⁵⁾ ⁶⁾

Switching frequency Q / to pin 2

1,000 Hz ¹¹⁾

Special feature

Detecting transparent objects

¹⁾ Limit values when operated in short-circuit protected network: max. 8 A.
²⁾ May not exceed or fall below U_v tolerances.
³⁾ Without load.
⁴⁾ Q = light switching.
⁵⁾ Signal transit time with resistive load.
⁶⁾ Valid for Q on Pin2, if configured with software.
⁷⁾ With light/dark ratio 1:1.
⁸⁾ A = V_S connections reverse-polarity protected.
⁹⁾ B = inputs and output reverse-polarity protected.
¹⁰⁾ C = interference suppression.
¹¹⁾ With light / dark ratio 1:1, valid for Q on Pin2, if configured with software.

Mechanical data

Housing

Rectangular

Design detail

Slim

Dimensions (W x H x D)

12.2 mm x 41.8 mm x 17.3 mm

Connection

Cable with M8 male connector, 4-pin

Connection detail
Length of cable (L)	150 mm

Material
Housing	Plastic, Novodur
Front screen	Plastic, PMMA

Weight

100 g

Ambient data

Enclosure rating	IP66 IP67
Ambient operating temperature	–10 °C … +50 °C
Ambient operating temperature extended	–30 °C … +55 °C ¹⁾ ²⁾
Ambient temperature, storage	–30 °C … +70 °C
UL File No.	NRKH.E181493
RoHS certificate	✔

¹⁾ As of T_a = 50 °C, a max. supply voltage V_max. = 24 V and a max. load current I_max. = 50 mA is permitted.
²⁾ Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible.

Smart Task

Smart Task name

Base logics

Logic function

Direct

AND

WINDOW

Hysteresis

Timer function

Deactivated

On delay

Off delay

ON and OFF delay

Impulse (one shot)

Inverter

Yes

Switching frequency

SIO Direct: 1000 Hz ¹⁾

SIO Logic: 1000 Hz ²⁾

IOL: 900 Hz ³⁾

Response time

SIO Direct: 300 µs … 450 µs ¹⁾

SIO Logic: 500 µs … 600 µs ²⁾

IOL: 500 µs … 900 µs ³⁾

Repeatability

SIO Direct: 150 µs ¹⁾

SIO Logic: 150 µs ²⁾

IOL: 400 µs ³⁾

Switching signal
Switching signal Q_L1	Switching output
Switching signal Q_L2	Switching output

¹⁾ SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
²⁾ SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
³⁾ IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.

Diagnosis

Device status Yes

Quality of teach Yes

Quality of run Yes, Contamination display

Classifications

eCl@ss 5.0	27270902
eCl@ss 5.1.4	27270902
eCl@ss 6.0	27270902
eCl@ss 6.2	27270902
eCl@ss 7.0	27270902
eCl@ss 8.0	27270902
eCl@ss 8.1	27270902
eCl@ss 9.0	27270902
eCl@ss 10.0	27270902
eCl@ss 11.0	27270902
eCl@ss 12.0	27270902
ETIM 5.0	EC002717
ETIM 6.0	EC002717
ETIM 7.0	EC002717
ETIM 8.0	EC002717
UNSPSC 16.0901	39121528