-
Features
Functional principle Photoelectric retro-reflective sensor Functional principle detail Dual lens Housing design (light emission) Hybrid Sensing range max. 0.05 m … 2 m 1) Sensing range 0.07 m … 1.5 m 1) Type of light Visible red light Light source LED 2) Wave length 660 nm Adjustment None Special features Sensor built into bracket with push-in snap pins
Optimized for reflector module PL21MS06P07
- 1) PLM21MS06P07.
- 2) Average service life: 100,000 h at TU = +25 °C.
-
Mechanics/electronics
Supply voltage 10 V DC … 30 V DC 1) Ripple < 5 Vpp 2) Current consumption 20 mA 3) Switching output PNP Switching mode Light switching Output current Imax. ≤ 50 mA Response time 1.2 ms Switching frequency 400 Hz 4) Connection type Cable with connector M8, 3-pin, 500 mm 5) Circuit protection A 6)
D 7)
Protection class III 8) Polarisation filter ✔ Special device ✔ Housing material Plastic, ABS Enclosure rating IP67 Ambient operating temperature –25 °C … +60 °C Ambient temperature, storage –40 °C … +70 °C UL File No. NRKH.E189383 & NRKH7.E189383 - 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) With light/dark ratio 1:1.
- 5) Do not bend below 0 °C.
- 6) A = VS connections reverse-polarity protected.
- 7) D = outputs overcurrent and short-circuit protected.
- 8) Reference voltage: 50 V DC.
-
Classifications
eCl@ss 5.0 27270902 eCl@ss 5.1.4 27270902 eCl@ss 6.0 27270902 eCl@ss 6.2 27270902 eCl@ss 7.0 27270902 eCl@ss 8.0 27270902 eCl@ss 8.1 27270902 eCl@ss 9.0 27270902 eCl@ss 10.0 27270902 eCl@ss 11.0 27270902 eCl@ss 12.0 27270902 ETIM 5.0 EC002717 ETIM 6.0 EC002717 ETIM 7.0 EC002717 ETIM 8.0 EC002717 UNSPSC 16.0901 39121528




