MultiTask photoelectric sensorsZoneControl

Type:RTN-M2117

Part no.:
1063199

sản phẩm chính hãng, MỚI 100% CHƯA SỬ DỤNG
SẢN PHẨM LUÔN ĐƯỢC KIỂM TRA TRƯỚC KHI XUẤT KHO
BẢO HÀNH 12 THÁNG ĐỐI VỚI LỖI CỦA NHÀ SẢN XUẤT / HOẶC THEO CHÍNH SÁCH CỦA SẢN PHẨM DO TRƯỜNG THỊNH PHÂN PHỐI
HỖ TRỢ KỸ THUẬT 24/7
MIỄN PHÍ GIAO HÀNG ĐỐI VỚI CÁC ĐƠN HÀNG TỪ 8,000,000VNĐ

SKU: RTN-M2117 Danh mục: Photoelectric sensors Thẻ: Part no.: 1063199, Type:RTN-M2117

Features

Functional principle	Photoelectric proximity sensor
Functional principle detail	Background suppression
Dimensions (W x H x D)	20.6 mm x 99.2 mm x 48.9 mm
Sensing range max.	60 mm … 900 mm
Sensing range	60 mm … 900 mm
Focus	7°
Type of light	Infrared light
Light source	LED ¹⁾
Light spot size (distance)	Ø 20 mm (500 mm)
Angle of dispersion	7°
Adjustment	Potentiometer, 9 turns
Special applications	ZoneControl

Mechanics/electronics

Supply voltage	21.6 V DC … 250 V DC, 96 … 250 V AC @ 60 Hz, 111 … 250 V AC @ 50 Hz ¹⁾ ²⁾ ³⁾
Ripple	< 5 V_pp ⁴⁾
Current consumption	10 mA ⁵⁾
Switching output	FET
Switching mode	Dark switching
Signal voltage NPN HIGH/LOW	Approx. VS / < 2.0 V
Output current I_max.	≤ 100 mA
Response time	2 ms
Switching frequency	250 Hz
Time functions	On delay
Delay time	0 s … 5 s
Connection type	Cable, 4-wire, 2 m ⁶⁾
Circuit protection	A ⁷⁾ C ⁸⁾ D ⁹⁾
Protection class	II
Weight	175 g
Housing material	Plastic, ABS
Enclosure rating	IP67
Shock and vibration resistance	According to IEC 68
Ambient operating temperature	–40 °C … +40 °C
Ambient temperature, storage	–40 °C … +75 °C
UL File No.	NRKH.E189383 & NRKH7.E189383

¹⁾ Limit values.
²⁾ UL requires the Rx-Mxxxx sensor to be installed in a circuit protected by a listed fuse, a listed (DHWZ/7) molded-case circuit breaker, or a supplementary R/C protection device (QVNU2/8) with min. 250 V, max. 2 A rating or equivalent.
³⁾ The output load and sensor must use the same power source.
⁴⁾ May not exceed or fall below U_v tolerances.
⁵⁾ Without load and valve deenergized.
⁶⁾ Do not bend below 0 °C.
⁷⁾ A = V_S connections reverse-polarity protected.
⁸⁾ C = interference suppression.
⁹⁾ D = outputs overcurrent and short-circuit protected.

Classifications